JBL RALLYBAR S 21 UTV SOUND BAR
Original price was: $649.99.$99.00Current price is: $99.00.
(In Stock)
JBL RALLYBAR S has a 150Wrms amplifier and extraordinary sound experience for UTVs, golf carts, boats, and other vehicles built for recreation. Each RALLYBAR S can be used by itself or connected to multiple RALLYBAR S or RALLYBAR S family products by using its built-in broadcast mode. The innovative mounting kit design offers multiple position combinations on top and back to accommodate a variety of installation requirements.
Features
Class-D Amplifier Built-In
The 150Wrms (THD<1%) Class-D amplifier ensures powerful, high-quality JBL Original Pro Sound when you take the wheel or hem.
Support Party Mode
Party Mode provides simultaneous connection of up to two Bluetooth devices – while playing music from one device at a time.
Water and Dust Resistant
IP66-rated water resistance protects soundbar speakers from dust ingress and powerful water jets.
JBL Pro Sound
With HI-RESOLUTION Audio on wired sources, JBL Original Pro sound tuning, and DSP delivers extraordinary sound performance.
WHAT’S IN THE BOX
- 1x Soundbar
- 2x Security cables
- 1xSmall Wrench | 1 x L- Small Allen wrench | 1xT-handle hex wrench
- 2x Straps with Velcro
- 1X G -Clamp | 1x Keychain | 1x 12ft (3.66m) power/ground wire harness
- 2x Rubber top covers | 2x Mount cleats
- 2x Short M8 screws | 2x Short M5 screws | 2x Long M5 screws | 2x M5 screw nuts | 4X Flat washers | 2X C -Clamps (2″ ) | 2X C -Clamps (1.75″ )
- 2X Thick rubber strips (for 1.5″ pole ) | 2x Thin rubber strips (for 2″ &1.75″ pole)
About this item
- 150Wrms Class-D Amplifier Built-in: The 150Wrms (THD <1%) Class- D amplifier ensures powerful, high quality JBL Original Pro Sound when you take the wheel or helm.
- IP66 Rated Water and dust Resistant: IP66 rated water resistant protects soundbar speakers from dust ingress and powerful water jets.
- Support Broadcast Mode: Broadcast Mode allows RALLYBAR S to connect to multiple RALLYBAR S or RALLYBAR S family products (RALLYBAR, RALLYBAR S and RALLYBAR XL), allowing each soundbar to play the same audio source.
- Innovative Mounting Kits Design: The innovative mounting kits design (patent pending), offers multiple position combinations on top and back to accommodate a variety of installation requirements.
- Music Remote Control by JBL Click: When users smartphone connected to the JBL RALLYBAR S and a JBL Click Bluetooth controller(sold separately), you can use the JBL Click to control the music from your smartphone (play/pause,next track,etc.)
- RALLYBAR S can detect the audio source automatically according to the source priority definition: USB disk >Bluetooth> AUX-IN audio source. Higher priority source can break-in Lower priority audio source.
- 3 Different Gain Settings: RALLYBAR S offers 3 different Gain settings when connected by Aux-in audio:2V, 4V, and 6V.
General Specifications
| Transducers | 4x 2.75(70mm) woofers, 2x 1(25mm) tweeters, 2x 7.2(182.8mm) x3(76.2mm) Racetrack Passive Radiators |
| Output Power | 150WRMS, 300W PEAK (IEC60268) |
| THD at Rated RMS Power | < 1% |
| Voltage Range | 9.6 – 16VDC |
| Quiescent Current Draw | < 0.9A |
| Maximum Current Draw | 25A |
| Frequency response | 45Hz-40kHz |
| Signal-to-noise Ratio | > 80 dB |
| Cable type | 12AWG |
| Bluetooth Version | 5.3 |
| Aux-In | 2Vrms(0.35Vrms – 2Vrms), 4Vrms(0.7Vrms – 4Vrms), 6Vrms(1.05Vrms – 6Vrms) (3.5 mm connector) |
| Aux-Out | 2 Vrms (3.5 mm connector) |
| Vehicle Fitment | Polaris RZR, Can-AM X3, Yamaha YXZ, Kawasaki KRX, Honda Talon, Golf Carts, Boats, Jeeps, & More |
| Soundbar Dimension | 21-5/32″ x 5″ x 4-5/8″ (537.5 x 126.7 x 118mm) |
| Soundbar Weight | 11.46 lbs (5.2kg) |
Reviews
There are no reviews yet.